BWW Sheet metal plate hook

The perfect lift.

The lifting of sheet metal stacks, boards etc. requires perfect tools - and the BWW sheet metal plate hook is one of them. It can also be supplied in customised dimensions upon request. As a standard, it may be used with Connex and the welded system and corresponds with EN 1677‑1 with the mechanical value of G10.

Please note that the product is not suitable for tip loading and that the hooks must be fully pushed onto the load. The lifting process must be carried out by means of min. a III-leg chain sling.
The classification of the WLL must be done carefully:

  • If a III-leg chain sling is used, the WLL is that of the corresponding II-leg chain sling
  • If a IV-leg chain sling is used, the WLL is that of the corresponding III-leg chain sling
The angle of inclination of the lifting system must be adjusted between 15° and 30°.


The sheet metal plate hook comes with CE-marking and a full operating manual.

Product Configurator Product inquiry


-
Stock: Please specify product option(s).
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly

Specification table

BWW Sheet metal plate hook Code / Type
Measurement Image BWW 7/8
BWW 10
BWW 13
BWW 16
BWW 19/20
BWW 22
Custom designs are available upon request!

Downloads

BWW 10

BWW 13

BWW 16

BWW 19/20

BWW 22

BWW 7/8