PLAW alpha

pewag winner profilift alpha.
Simply the best!

This lifting point is 360° rotatable. The load ring is loadable in a wide range and can be positioned at any required angle due to its replaceable and patented spring. The hexagonal special screw is also replaceable and secured against loss. The PLAW pewag winner profilift alpha screw is made from 10.9 grade material, 100% crack-tested, covered with a chromate VI-free protection agent against corrosion and marked with the load capacity and thread size.

pewag winner profilift alpha is able to withstand a 4-fold safety factor against break in all directions and every single lifting point is marked with an individual serial number. pewag winner profilift alpha is available with metric or UNC-thread. The versions with metric thread are also available with customised thread lengths. All load capacities, categorised by type of application, the number of legs and angle of inclination, are contained in a table that forms an integral part of the operating manual included with each lifting point.

Also available with peTAG upon request.

Product inquiry


Stock: Please specify product option(s).
Stock: available
Stock: short stock
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly

Specification table

PLAW alpha Code / Type thread
[inch]
load capacity
[lbs]
hex-wrench
[inch]
screw-wrench
[inch]
Measurement Image PLAW 0,3 t - 660 - -
PLAW 0,63 t - 1,350 - -
PLAW 1 t - 2,200 - -
PLAW 1,5 t - 3,300 - -
PLAW 2,5 t - 5,500 - -
PLAW 4 t (/13) - 8,800 - -
PLAW 6 t - 13,200 - -
PLAW 7 t - 15,400 - -
PLAW 8 t - 17,000 - -
PLAW 10 t - 22,000 - -
PLAW 15 t - 33,000 - -
PLAW 20 t - 44,000 - -
PLAW alpha Code / Type thread
[inch]
load capacity
[lbs]
a
[inch]
b
[inch]
c
[inch]
d
[inch]
e
[inch]
g
[inch]
h
[inch]
k
[inch]
n
[inch]
n max
[inch]
hex-wrench
[inch]
screw-wrench
[inch]
weight
[lbs/pc.]
Measurement Image PLAW U 3/8 3/8"-16 1,400 1.77 2.64 1.57 0.43 1.61 3.72 1.42 2.17 0.79 - 3/8" 15/16" 1.30
PLAW U 1/2 1/2"-13 2,200 1.77 2.64 1.57 0.43 1.61 3.72 1.42 2.17 1.30 - 3/8" 15/16" 1.32
PLAW U 5/8 5/8"-11 3,300 1.77 2.64 1.57 0.43 1.61 3.72 1.42 2.17 1.30 - 3/8" 15/16" 1.39
PLAW U 1 1/4 1 1/4"-7 13,200 2.95 4.53 2.64 0.79 2.68 5.63 2.64 3.94 1.93 - 7/8" - 6.80
PLAW U 1 1/2 1 1/2"-6 17,000 3.66 5.79 3.35 1.06 3.43 7.40 3.35 4.72 2.09 - 1" - 13.40
PLAW U 1 3/4 1 3/4"-5 22,000 3.66 5.79 3.35 1.06 3.43 7.40 3.35 4.72 2.44 - 1 1/4" - 14.10
PLAW alpha Code / Type thread
[inch]
fastening torque
[ft-lbs]
load capacity 1-leg 0°
[lbs]
load capacity 1-leg 90°
[lbs]
Measurement Image PLAW 0,3 t - - 660 660
PLAW 0,63 t - - 1,350 1,350
PLAW 1 t - - 2,200 2,200
PLAW 1,5 t - - 3,300 3,300
PLAW 2,5 t - - 5,500 5,500
PLAW 4 t (/13) - - 8,800 8,800
PLAW 6 t - - 13,200 13,200
PLAW 7 t - - 15,400 15,400
PLAW 8 t - - 17,000 17,000
PLAW 10 t - - 22,000 22,000
PLAW 15 t - - 33,000 33,000
PLAW 20 t - - 44,000 44,000
PLAW alpha Code / Type thread
[inch]
fastening torque
[ft-lbs]
load capacity 1-leg 0°
[lbs]
load capacity 1-leg 90°
[lbs]
Measurement Image PLAW U 3/8 3/8"-16 52 1,400 1,400
PLAW U 1/2 1/2"-13 89 2,200 2,200
PLAW U 5/8 5/8"-11 110 3,300 3,300
PLAW U 1 1/4 1 1/4"-7 369 13,200 13,200
PLAW U 1 1/2 1 1/2"-6 590 17,000 17,000
PLAW U 1 3/4 1 3/4"-5 740 22,000 22,000
Safety factor 4
Important: Subject to technical changes!

Product description

Permitted usage
For load capacities in the permitted directions of pull, please refer to the load capacity table.

Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:

  • Direction of pull is obstructed.
  • Direction of pull is not within the indicated area.
  • Loading ring rests against edges or loads.

The load ring must be placed in the direction of pull before loading – do not turn under load! For additional details and information, please refer to the full operating manual.

Calculating the required thread length (L):
L = H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.

In addition to the standard and maximum thread lengths, pewag also offers cut-to-length thread lengths. Customised and maximum thread lengths are supplied with a washer and a crack-tested, corrosion-proofed screw nut.

For detailed information such as method of lifting, number of legs, angle of inclination etc., please refer to the tables with technical data.

3D views

Videos