PLDW Delta

pewag winner profilift lifting point PLDW Delta.
Rotatable even under load.

This lifting point comes with a ball bearing and is rotatable by 360° even under load. The high-strength lifting eye is movable by 180°. The special screw is 100% crack-tested, protected against corrosion and marked with the load capacity and thread size. In addition, each lifting point is marked with its own individual serial number. The high-strength lifting eye comes with a ring and is wide enough to accommodate even larger hooks.

All load capacities, categorised by method of lifting, number of legs and angle of inclination are contained in a table that forms an integral part of the operating manual included with each lifting point. The pewag winner profilift delta lifting points are marked with the admissible load capacity for the most unfavourable application mode, allowing for an increased load capacity in case of vertical loads and four-fold safety against break in all directions.

A strength class of 12.9 is used for the PLDW screw.

Also available with peTAG upon request.

Product Configurator Product inquiry


-
Stock: Please specify product option(s).
Stock: available
Stock: available shortly
Stock: available shortly
Stock: good availability
Stock: good availability
Stock: good availability
Stock: good availability
Stock: good availability
Stock: available
Stock: good availability
Stock: good availability
Stock: good availability
Stock: good availability
Stock: short stock
Stock: available shortly
Stock: available
Stock: short stock
Stock: available
Stock: available shortly
Stock: good availability
Stock: good availability
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: good availability
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly

Specification table

PLDW Delta Code / Type thread
[mm]
thread
[inch]
load capacity
[kg]
load capacity
[lbs]
a
[mm]
b
[mm]
c
[mm]
d
[mm]
e
[mm]
n
[mm]
n max
[mm]
screw-wrench
[mm]
screw-wrench
[inch]
weight
[kg/pc.]
Measurement Image PLDW 0,3 t M8 - 300 5,500 30 38 54 13 38 20 100 34 - 0.45
PLDW 0,5 t M10 500 30 38 54 13 38 20 180 34 0.45
PLDW 0,7 t M12 700 35 48 54 13 38 22 200 34 0.48
PLDW 1,8 t M20 1,800 35 48 54 13 38 30 - 34 0.50
PLDW 1 t M14 1,000 35 48 54 13 38 22 200 34 0.49
PLDW 1,5 t M16 1,500 35 48 54 13 38 33 250 34 0.51
PLDW 3,5 t M24 3,500 35 55 75 16 55 30 - 46 1.10
PLDW 2,5 t M20 2,500 35 55 75 16 55 33 250 46 1.05
PLDW 5,3 t M30 5,300 40 66 82 17 63 35 300 50 1.50
PLDW 4 t M24 4,000 40 66 82 17 63 40 300 50 1.50
PLDW 6,7 t M30 6,700 50 70 92 23 72 40 300 60 2.49
PLDW 8 t M36 8,000 50 91 120 23 92 55 300 75 4.30
PLDW M52 - 12,5t 1)  M52 12,500 65 116 120 27 92 68 - 75 5.40
PLDW 10 t M42 10,000 65 91 120 27 92 60 300 75 5.10
PLDW 12 t 1)  M45 12,000 65 91 120 27 92 68 - 75 5.20
PLDW M48 - 12,5 t M48 12,500 65 116 120 27 92 68 300 75 5,4
PLDW 24 t M56 24,000 70 105 154 33 110 84 300 95 10.20
PLDW 25 t M64 25,000 70 105 154 33 110 96 300 95 11.00
PLDW 40 t M72 40,000 90 130 213 45 170 110 500 145 29.00
PLDW 45 t M80 45,000 90 130 213 45 170 120 500 145 30.00
PLDW M90 - 55 t M90 55,000 90 130 213 45 170 135 500 145 32.00
PLDW M100 - 55 t M100 55,000 90 130 213 45 170 150 500 145 35.00
PLDW Delta Code / Type thread
[inch]
load capacity
[lbs]
a
[inch]
b
[inch]
c
[inch]
d
[inch]
e
[inch]
n
[inch]
n max
[inch]
screw-wrench
[inch]
weight
[lbs/pc.]
Measurement Image PLDW U 3/8 3/8"-16 1,100 1.18 1.50 2.13 0.51 1.50 0.59 - 1.34 1.00
PLDW U 1/2 1/2"-13 1,500 1.38 1.89 2.13 0.51 1.50 0.79 - 1.34 1.06
PLDW U 5/8 5/8"-11 3,300 1.38 1.89 2.13 0.51 1.50 0.98 - 1.34 1.10
PLDW U 3/4 3/4"-10 4,400 1.38 2.17 2.95 0.63 2.17 1.18 - 1.81 2.43
PLDW U 1 1"-8 8,800 1.57 2.60 3.23 0.67 2.48 1.57 - 1.97 3.30
PLDW U 1 1/4 1 1/4"-7 14,700 1.97 2.76 3.62 0.91 2.83 1.77 - 2.36 5.70
PLDW U 1 1/2 1 1/2"-6 17,600 1.97 3.58 4.72 0.91 3.62 2.17 - 2.95 9.50
PLDW U 1 3/4 1 3/4"-5 22,000 2.56 3.58 4.72 1.06 3.62 2.36 - 2.95 11.20
PLDW U 2 2"-4.5 27,500 2.56 4.57 4.72 1.06 3.62 2.68 - 2.95 11.90
PLDW U 2 1/2 2 1/2"-4 39,600 2.76 4.13 6.06 1.30 4.33 3.78 - 3.74 22.40
Method of lifting icon 1-legs 0-angle icon 1-legs 90-angle icon 2+3+4-legs 60-angle icon 2+3+4-legs 90-angle icon 2+3+4-legs 120-angle icon 1-legs 0-angle icon 1-legs 90-angle icon 2+3+4-legs 60-angle icon 2+3+4-legs 90-angle icon 2+3+4-legs 120-angle
Number of legs 1 1 2+3+4 2+3+4 2+3+4 1 1 2+3+4 2+3+4 2+3+4
Angle of inclination 90° 60° 90° 120° 90° 60° 90° 120°
PLDW Delta Code / Type thread
[mm]
thread
[inch]
fastening torque
[Nm]
fastening torque
[ft-lbs]
load capacity
[kg]
Measurement Image PLDW 0,3 t M8 - 10 59 600 300 520 400 300 11,000 5,500 9,400 7,700 5,500
Method of lifting icon 1-legs 0-angle icon 1-legs 90-angle icon 2+3+4-legs 60-angle icon 2+3+4-legs 90-angle icon 2+3+4-legs 120-angle
Number of legs 1 1 2+3+4 2+3+4 2+3+4
Angle of inclination 90° 60° 90° 120°
PLDW Delta Code / Type thread
[inch]
fastening torque
[ft-lbs]
load capacity
[lbs]
Measurement Image PLDW U 3/8 3/8"-16 7.50 2,640 1,100 1,900 1,550 1,100
PLDW U 1/2 1/2"-13 11 3,900 1,500 2,600 2,100 1,500
PLDW U 5/8 5/8"-11 22 6,100 3,300 5,700 4,600 3,300
PLDW U 3/4 3/4"-10 60 8,800 4,400 7,600 6,200 4,400
PLDW U 1 1"-8 110 15,400 8,800 15,200 12,400 8,800
PLDW U 1 1/4 1 1/4"-7 170 22,000 14,700 25,400 20,800 14,700
PLDW U 1 1/2 1 1/2"-6 330 27,500 17,600 30,400 24,900 17,600
PLDW U 1 3/4 1 3/4"-5 440 35,200 22,000 38,100 31,100 22,000
PLDW U 2 2"-4.5 440 35,200 27,500 47,700 38,900 27,500
PLDW U 2 1/2 2 1/2"-4 600 61,700 39,600 68,700 56,100 39,600
 1)  No stock item, delivery time on request
Safety factor 4
Important: Subject to technical changes!

Product description

Permitted usage
For load capacities in the permitted directions of pull, please refer to the load capacity table.

Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:

  • Direction of pull is obstructed.
  • Direction of pull is not within the indicated area.
  • Loading ring rests against edges or loads.

Although the upper part is ball bearing and rotatable 360°, before usage you should adjust the ring in the correct direction of tension (fig. Permitted directions of pull). That applies in particular when lifting with multi leg slings. With a non-aligned ring (fig. Non-permitted directions of pull), the ring holder could turn suddenly under load, and it comes to high risk for the load and/or people.

The full operating manual contains further details and information on safe usage.

Calculating the required thread length (L):
L = H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.

In addition to the standard and maximum thread lengths, pewag also offers cut-to-length thread lengths. Customised and maximum thread lengths are supplied with a washer and a crack-tested, corrosion-proofed screw nut (applicable up to size M64). From thread size M72, the delivery is made with a nut (1.5 times the height) manufactured according to DIN 6331.

3D views

Videos

Downloads

PLDW 0,3 t

PLDW 0,5 t

PLDW 0,7 t

PLDW 1 t

PLDW 1,5 t

PLDW 10 t

PLDW 12 t

PLDW 2,5 t

PLDW 24 t

PLDW 25 t

PLDW 4 t

PLDW 40 t

PLDW 45 t

PLDW 5,3 t

PLDW 6,7 t

PLDW 8 t

PLDW M100 - 55 t

PLDW M48 - 12,5 t

PLDW M90 - 55 t

PLDW U 1

PLDW U 1 1/2

PLDW U 1 1/4

PLDW U 1 3/4

PLDW U 1/2

PLDW U 2

PLDW U 2 1/2

PLDW U 3/4

PLDW U 3/8

PLDW U 5/8